MP Metals, Inc.

Shapes

   Channels
   Angles
   Cee-Sections
   Rings
   Hats
   Zee-Sections
   Custom Shapes
   Heat Transfer Plates
   Construction Parts
   Panels
   Common Shapes
   Tubes

Helpful Links

   FAQs
   Why Roll Form?
   Materials & Finishes
   Design Guide
   Need a Quote?
   Ask a Question?
   Need a Map?

HATS HATS provide stable support, sometimes in structural applications. Hats offer flat surfaces for fastening and often include notches and other mounting holes.
	H-101 1.3" x 2.5", H-101 16 gage roll formed galvanized hat girt
	H-102 1.3" x 2.8", H-102 18 gage roll formed galvanized hat girt
	H-103 1.5" x 3", H-103 14 to 18 gage roll formed galvanized hat profile
	H-104 1.5" x 5.5", H-104 28 to 26 gage roll formed metal 2 x 4 girt or purlin Galv
	H-104 unknown size, H-104 28 to 26 gage roll formed metal 2 x 4 girt or purlin Painted
	H-105 1.8" x 1.5", H-105 24 gage roll formed galvanized expansion joint
	H-107 0.4" x 1.5", H-107 painted roll formed galvanized hat
	H-108 0.5" x 0.6", H-108 29 gage roll formed transmission ring holder
	H-109 3" x 3.7", H-109 14 to 18 gage roll formed galvanized hat girt and purlin
	H-110 2.5" x 7.5", H-110 28 to 26 gage roll formed metal 2 x 6 girt or purlin
	H-111 1.5" x 3", H-111 16 gage roll formed stringer
	H-112 3" x 3.7", H-112 14 to 18 gage roll formed galvanized hat with swaged end girt and purlin
	H-113 0.8" x 3.6", H-113 21 gage roll formed galvanized frames
	H-114 1" x 3", H-114 roll formed aluminum insulation hat
	H-115 1" x 3", H-115 18 gage roll formed steel insulation hat
	H-116 0.5" x 1.8", H-116 20 gage roll formed galvanized hat shape
	H-117 The Pallet Support, in a Hat shape style, is available in custom lengths. The Beam Accessory complements many rack systems. Common lengths are nominally 36”, 42”, 44” and 48” in hot-dipped galvanized steel. The actual part length is usually 3.375” shorter than the nominal length. Ask about current prices and lead times.
	H-118 Heavy duty metal SIGN POST, custom roll formed in 14, 16 and 18 gage hot rolled, cold rolled or galvanized steel. Mill finish aluminum is also available. Outside dimensions are 1.5” high by 2.6” wide overall. One end is tapered for driving into the ground. Please contact us for other options if you need something a little different.
	H-119 26 gage Stainless Steel Roll formed Hat. This hat may be used as a stiffener, housing, cable or wire raceway cover, or clamping device. This picture shows the 0.4” height with a 1.5” outside width. Custom gauges, materials and sizes are available. Please contact us for other options if you need something a little different.